Seam sealing following repair, side damage - AR97.10-P-4000-03CW

WARNING: This page is about a different car, the 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1003-01A	Sealant, white, 310 ml, DB supply specification 6069.20	A 001 989 63 20
BR00.45-Z-1041-01A	Seam sealant, sprayable 310 ml	A 002 989 84 20

Seal spot welds and rivets in repaired area with seam sealant material.
Insert plastic plugs and rubber grommets with sealing compound.

Keep sealant out of threads on weld nuts and threaded bolts by masking or covering with cardboard sleeves. Also keep drain openings and contact surfaces for axle attachments, windows and detachable parts free of sealant.

It is necessary to seal accessible spot weld flanges on both sides. If accessible from one side, only seal corresponding surface.

Observe standard seals!

Fig 1: Identifying Sealant Area Of A-Pillar, Sidewall Paneling Or Inner And Rocker Panel
Courtesy of MERCEDES-BENZ USA

Area of A-pillar, sidewall paneling or inner and rocker panel

Fig 2: Identifying Sealant Area Of B-Pillar And Rocker Panel

Courtesy of MERCEDES-BENZ USA

Area of B-pillar and rocker panel

Fig 3: Identifying Rear Fender Sealant Area

Courtesy of MERCEDES-BENZ USA

Rear fender area

Fig 4: Identifying Sealant Area Of Underfloor And Inner Or Outer Rear Wheel Well

Courtesy of MERCEDES-BENZ USA

Area of underfloor and inner or outer rear wheel well