Remove/install SAM with fuse and relay box, left front - AR54.21-P-1260P
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 203, 209
Shown on model 203.0
Shown on model 203.0, engine 642
Fig 2: Identifying SAM Remove/Install Components With Fuse And Relay Box - Shown On Model 203.0, Engine 642
| Remove/install | |||
| 1.1 | Connect STAR DIAGNOSIS and buffer basic data from driver-side SAM control unit with fuse and relay module (N10/1) in STAR DIAGNOSIS. | When replacing the front SAM control unit with fuse and relay module (N10/1). | |
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| STAR DIAGNOSIS diagnosis system | *WH58.30-Z-1048-13A | ||
| Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities. | Always remove ignition key when working on windshield wiper mechanism. | AS82.30-Z-0001-01A | |
| 2.1 | Set wiper arms to vertical position | Engine 111 Engine 112 Engine 113 Engine 271 Engine 611 Engine 612 Engine 646 |
|
| 2.2 | Remove water collector | ||
| Model 203 | AR83.25-P-1402P | ||
| Model 209 | AR83.25-P-1402Q | ||
| 3.1 | Unscrew wiper linkage (5) from wiper hinge (arrow), move over the bracket (6) and position outside the working area | ||
| 4 | Disconnect battery ground cable | ||
| Model 203 | AR54.10-P-0003P | ||
| Model 209 | AR54.10-P-0003Q | ||
| Notes on battery | All models | AH54.10-P-0001-01A | |
| 5.1 | Unlock and remove cover (1) on module housing (4) | Engine 111 Engine 112 Engine 113 Engine 271 Engine 611 Engine 612 Engine 646 |
|
| 5.2 | Unscrew bolts (7) and remove cover (1) of module box (4) | Engine 642 |
|
| 6.1 | Remove injection system control unit | Engine 111 Engine 112 Engine 113 Engine 611 Engine 612 Engine 646 |
AR07.08-P-7008P |
| 6.2 | Remove front SAM control unit with fuse and relay module (N10/1) from guide. | Engine 271 | |
| 7 | Remove bolts (3) | ||
| 8 | Release and remove upper connectors | AR54.18-P-1261-01P | |
| AR54.18-P-1261-02P | |||
| 9 | Expose wiring harness. | ||
| 10 | Remove front SAM control unit with fuse and relay module (N10/1) upwards. | ||
| 11 | Release and remove lower connectors | AR54.18-P-1261-01P | |
| AR54.18-P-1261-02P | |||
| 12 | Remove front SAM control unit with fuse and relay module (N10/1). | ||
| Fuse assignment, as-built configuration | Model 203 | GF54.15-P-1256P | |
| Fuse assignment, as-built configuration | Models 209.316/342/343/361/365/375/376 | GF54.15-P-1256Q | |
| Relay assignment, as-built configuration | Model 203, 209.316/342/343/361/365/375/376 | GF54.15-P-1257P | |
| 13 | Install in the reverse order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation | |
|---|---|---|
| WH58.30-Z-1048-13A | STAR DIAGNOSIS diagnosis system, Compact Passenger Car | 6511 1801 00 |