Remove/install outer paneling on trunk lid - AR88.50-P-5080QA

MODEL 209.4 

Fig 1: Identifying Outer Paneling On Trunk Lid Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove paneling at trunk lid		AR68.30-P-8150Q
2	Slightly press safety catch (1) together from inside on both sides and lift outer paneling (2) with assembly wedge.	Installation:  Check safety catch (1), if necessary replace outer paneling (2).	Fig 2
3	Release outer paneling (2) from hook (3).		Fig 2
4	Detach outer paneling (2) from double-sided adhesive tape and remove.	Installation:  Replace double-sided adhesive tape.
5	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA