Remove/install Keyless-Go antenna - AR82.62-P-8000Q
MODEL 209
with CODE (889) Keyless Go
except CODE (P98) Black Series
antenna in rear bumper
MODIFICATION NOTES
| 11.2.04 | "Disconnect/connect battery ground line" removed |
| Remove/install | |||
|---|---|---|---|
| 1.1 | Remove rear bumper (1) | On vehicles with code (550) trailer coupling. | AR88.20-P-2200Q |
| 1.2 | Raise vehicle | On vehicles without code (550) trailer coupling. | AR00.60-P-1000P |
| 2 | Disconnect electrical connector (2) | ||
| 3 | Unscrew bolt (3). | ||
| 4 | Unclip and remove rear bumper KEYLESS-GO antenna (A2/31) | ||
| 5 | Install in the reverse order | ||
| 6 | Carry out function check |