Seat belt extender is nonfunctional - AF91.45-P-6000A

MODEL 209.4## #T up to 022105

OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES

Category	Op. no.	Operation text	Time	Acc. no.	Code
P	024553	Recode RVC [UVS] control unit	005 WU	-	-

Damage code	Cause	Remedy
82 481 90	The counter in the control unit deactivates the seat belt extender.	1 Read out the RVC [UVS] fault memory (roll bar Vario roof control).
	For the left seat belt extender, fault code B 1405 is stored in the convertible top control unit (roll bar Vario roof control) and for the right seat belt extender, fault code B 1505 is stored.	2 Process the faults present and delete fault memory twice. If fault codes B 1405 and B 1505 are the only ones stored, then just delete the fault memory twice.
		If the fault memory cannot be deleted: ↓ 3 Pull fuses 32 and 33 (interior fuse box F34) for 15 seconds and then delete fault memory again.
		4 Code the RVC [UVS] control unit using STAR DIAGNOSIS in the "Control unit adaptations" menu. When doing so proceed as follows: Control units Design RVC [UVS] roll bar Vario roof control Control unit adaptations Seat belt extender: automatic block function After a few seconds the block counter will be permanently deactivated and faults B 1405 and B 1505 should not appear again.

PARTS ORDERING NOTES

Part no.	Designation	Quantity
203 860 01 82	Left seat belt extender	1
203 860 02 82	Right seat belt extender	1
209 820 45 26	Convertible top control unit (RVC [UVS])	1