Brake system - inspect fluid level - AP42.10-P-4210Z

MODEL 124, 129, 140, 163, 168, 170, 202, 203, 208, 209, 210, 211, 215, 230 

MODEL 414 

MODEL 220 except CODE (Z07) Top protection 

Shown on model 202 

Fig 1: Identifying Brake System - Inspect Fluid Level Show On Model 202

Shown on model 230 

Fig 2: Identifying Brake System - Inspect Fluid Level Show On Model 230

	Check
	Risk of poisoning  caused by swallowing brake fluid. Risk of injury  caused by brake fluid coming into contact with skin and eyes.	Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Brake fluid notes	All models	AH42.50-P-0001-01A
	Notes on repairs to brake system	All models	AH42.00-P-0003-01A
1	Check fluid level in the brake system	The fluid level must be between the "MAX." and "MIN." markings stamped on the brake fluid expansion reservoir. If the fluid level is too low, find and eliminate the cause and check the brake disks and brake pads for wear and condition. Check brake system, ABS, ETS, ASR, ESP, SBC (also pressure reservoir, charging pump and charge plunger unit in the wheelhouse) for leaks.