Remove/install mirror lens - AR88.70-P-9020Q
MODEL 209
MODIFICATION NOTES
| 3.3.04 | Disconnect/connect/remove ground lead from battery |
| Remove/install | |||
|---|---|---|---|
| 1 | Move mirror glass (1) upward toward rear | ||
| 2 | Unhook retaining spring (2) | ||
| 3 | Unlock mirror glass (1) and remove l | Installation: First insert arresting lug (3) for mirror glass (1) into mirror adjustment drive. |
Figure |
| 4 | Disconnect electrical connectors (4) from mirror heater | ||
| 5.1 | Disconnect electrical connector from mirror dimming | On vehicles with code (249b) Automatic dimming inside and outside mirrors (driver) | |
| 6 | Install in the reverse order | ||
| 7 | Clean mirror glass | ||
| 8 | Perform function check |