Remove/install paneling at top of windshield - AR68.30-P-4250QA

MODEL 209.4 

Fig 1: Identifying Paneling At Top Of Windshield Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove overhead control panel control module (N70)		AR82.20-P-1000QA
2	Remove sun visors (2)
3	Unclip paneling at wind deflector (3) and remove	See arrows.
		Installation:  Ensure, that the guide pins of the paneling at wind deflector (3) are fitted on both sides correctly into the paneling of A-pillar (1).
4	Install in the reverse order