Remove/install contact plate for portable CTEL holder (UPCI [UHI]) in the armrest - AR82.70-P-8919Q
MODEL 209 as of 1.6.04 with CODE (386) Pre-installation for telephone "Handy", UPCI system
MODIFICATION NOTES
| 24.5.06 | "Disconnect/connect ground line on battery" removed |
| Remove/install | |||
|---|---|---|---|
| 1 | Fold center armrest (3) out | ||
| 2 | Remove mounting bolt (1) of lower covering (2) of center armrest (3) | ||
| 3 | Slide lower covering (2) downwards and remove | ||
| 4 | Remove mounting bolts of UPCI [UHI] portable CTEL holder (Universal Handy Interface) (A34/15) | ||
| 5 | Fold center armrest (3) down | ||
| 6 | Fold center armrest (3) up to one side | ||
| 7 | Lift UPCI [UHI] portable CTEL holder (Universal Handy Interface) (A34/15) | ||
| 8 | Disconnect connector (6) from UPCI [UHI] portable CTEL holder (Universal Handy Interface) (A34/15) | ||
| 9 | Disconnect electrical connector (5) from UPCI [UHI] portable CTEL holder (Universal Handy Interface) (A34/15) | ||
| 10 | Remove UPCI [UHI] portable CTEL holder (Universal Handy Interface) (A34/15) | ||
| 11 | Install in the reverse order |