Remove/install headlamp cleaning system pump - AR82.35-P-6003QBS (Black Series)

Fig 1: Removing/Installing Headlamp Cleaning System Pump - Black Series

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

MODEL 209 with CODE (P98) Black Series 

	Remove/install
1	Remove dust filter		AP83.00-P-8381P
2	Undo clamp screw (1s) and lift up washer fluid reservoir (1)
3	Remove HCS [SRA] pump (M5/2) from washer fluid reservoir (1)	Collect washer fluid which flows out.
4	Detach water hose (3) from HCS [SRA] pump (M5/2) and then seal
5	Detach electrical connector on HCS [SRA] pump (M5/2)
6	Install in the reverse order
7	Correct fluid level of windshield washer system
	Check windshield washer system fluid level and correct if necessary		AP82.35-P-8210P