Remove/install fog lamp - AR82.10-P-5103Q
MODEL 209 except CODE (P98) Black Series
MODIFICATION NOTES
| 11.2.04 | "Disconnect/connect battery ground line" removed |
| Remove/install | |||
|---|---|---|---|
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| 1 | Remove finder liner in front fender | Only remove front fender liner. | AR88.10-P-1300P |
| 2 | Detach electrical connector on left fog lamp (E5/1) or electrical connector on right fog lamp (E5/2) | ||
| 3.1 | Remove front engine compartment paneling | Vehicles with gasoline engine | AR61.20-P-1105P |
| 3.2 | Remove bottom part of noise encapsulation at front | Vehicles with diesel engine | AR94.30-P-5300P |
| 4 | Remove bolts (1) | ||
| 5 | Take out the left fog lamp (E5/1) or right fog lamp (E5/2) | ||
| 6 | Install in the reverse order | ||
| 7 | Adjust left fog lamp (E5/1) and right fog lamp (E5/2) | ||
| Check and correct headlamp adjustment | AP82.10-P-8260P |