Opening engine hood, moving to upright position, closing - AR88.40-P-1000M
MODEL 220, 215
Illustrated on model 220
| Contact with components under high voltage can pose lethal hazard | Do not touch parts under high voltage. People with electronic implants (e.g. heart pacemakers) should not perform work on ignition system. | AS15.10-Z-0001-01A | |
| Opening | |||
| 1 | Pull lever (1) in driver's footwell to release engine hood | ||
| 2 | Pull handle (2) out of radiator grille to stop and open engine hood | ||
| Moving to upright position | |||
| 3 | Press locking lever (3) on right engine hood hinge in direction of arrow and press engine hood upward lightly so that locking lever does not catch. Repeat procedure on left engine hood hinge and move engine hood to upright position | ||
| Closing | |||
| 4 | Press locking lever (3) on left engine hood hinge in direction of arrow and close engine hood until locking lever (3) engages | ||
| 5 | Close engine hood. For this purpose place hands on edge of engine hood only |