Detach/install link rod at torsion bar - AR32.20-P-0300-02VB
| Number | Designation | Model 220.083/084/ 087/183/184/187 | |
|---|---|---|---|
| BA32.20-P-1002-02H | Nut, link rod to torsion bar | Nm | 95 |
Removal
- Remove self-locking nut (01) and bolt (02) from link rod (10) on torsion bar (11).
Check rubber mounts of link rod (10) for damage, install new link rod (10) if necessary.
Installation
- Screw in self-locking nut (01) and bolt (02) of link rod (10) on torsion bar (11)
.
Install new self-locking nut (01). Only tighten self-locking nut (01) when vehicle is ready to drive, turn steering if necessary.