Removing and installing front seats - AR91.10-P-1000N

MODEL 215 

Fig 1: Identifying Front Seats Remove/Install Components - Model 215 (1 Of 2)

Fig 2: Identifying Front Seats Remove/Install Components - Model 215 (2 Of 2)

	Removal, installation
1	Move head (2) rest down as far as possible
2	Move front seat (1) forwards
3	Unbolt bolts (3) on seat rails at rear		*BA91.10-P-1001-01C
4	Remove covers (4) on seat rails at rear
5	Move front seat (1) back
6	Unbolt bolts (3) on seat rails at front		*BA91.10-P-1001-01C
7	Remove covers (4) from seat rails at front
8	Disconnect pneumatic line (5) connector and electrical connector (6)	Installation  : Suspend wiring harness in clamp (8).
9	Disconnect left and right seat contacting strips (X55/3, X55/4) from left and right convenience seat adjustment control modules (N31, N32).	Push left and right seat contacting strip (X55/3, X55/4) locking mechanisms in direction of arrow.
10	Lift and remove front seat (2)	Insert check hook (7) in floor of vehicle.
11	Install in reverse order

FRONT SEATS

Number	Designation		Model 215
BA91.10-P-1001-01C	Screw on seat rail	Nm	50