Remove and install driver's seat cushion - AR91.10-P-1070M
MODELS 220.0 /1 up to 31.8.02
Fig 1: Identifying Driver'S Seat Cushion Remove/Install Components - Models 220.0 /1 Up To 31.8.02 (1 Of 2)
Fig 2: Identifying Driver'S Seat Cushion Remove/Install Components - Models 220.0 /1 Up To 31.8.02 (2 Of 2)
| Remove/Install | |||
| 1 | Remove front seat | AR91.10-P-1000M | |
| 2 | Unscrew screw (1) and remove paneling (2) | ||
| 3.1 | Open cap (5) and remove fire extinguisher | With fire extinguisher, code 682. | |
| 4 | Unscrew screws (6, arrows) and remove paneling (4) and cap (5) | ||
| 5 | Pull off paneling (3) in direction of arrow | ||
| 6 | Remove electrical connector of seat cushion heater from front seat adjustment control module with memory, left (N32/1) / right (N32/2) | ||
| 7.1 | Removing multicontour backrest control module from front seat | With multicontour backrest driver seat code 404b, passenger seat code 405b. | AR91.25-P-1750M |
| 8 | Unscrew screw (9) and remove paneling (10) | ||
| 9 | Unscrew screws (13) and remove seat cushion (8) from the seat adjuster (7) towards the front | *BA91.10-P-1003-01H | |
| 10 | Unscrew screws (12, arrows) from the seat cushion (8) and remove bracket (11) from the seat cushion (8) | ||
| 11 | Install in the reverse order |
| Number | Designation | Model 220 up to 30.11.01 | Model 220 as of 1.12.01 | |
|---|---|---|---|---|
| BA91.10-P-1003-01H | Bolt of seat cushion to seat adjusting device | Nm | 15 | 15 |