Remove/install crank window in rear door - AR72.12-P-1910M

MODEL 220 

Fig 1: Identifying Crank Window In Rear Door Remove/Install Components

	Remove, Install
1	Remove door liner from rear door		AR72.12-P-1010M
2	Remove insulating mat from inner door panel	000 Installation:  Before installing insulating mat, check crank window for easy motion Replace damaged insulating mat
3	Remove inner sealing rail		AR72.10-P-1600E
4	Remove trim strip with outer sealing rail		AR72.10-P-1700E
5	Unscrew bolt (3)	Removal:  Open crank window (2) until the mounting screw (3) of the window guide rail in the assembly opening (4) is accessible Installation:  Install screw (3) so that the crank window (2) can be moved up and down properly
6	Slide crank window (2) downward and position in door	First move crank window (2) out of window guide rail
7	Remove window rail guide (5) together with window stay (1)	Remove window guide rail (5) only in area of window stay Installation:  Coat window guide rail (5) with soap solution.	AR72.12-P-1970M
8	Turn crank window (2) until it can be removed out of window shaft upward
9	Install in the reverse order