Adjust rear door window - AR72.12-P-1921MB
MODEL 220.175 /178 with CODE (Z07) Top protection
| 1 |
Check window operation (1) by opening and closing |
If "jerking" or "tilting" of the rear window is noticed, readjust upper window guide rail (3). |
|
| 2 |
Open rear window (1) |
|
|
| 3 |
Measure gap (a) |
|
*BE72.12-P-1001-01BA |
| 4 |
Carefully loosen textile profile in upper area of window guide rail (3) |
|
|
| 5 |
Slacken bolts (5, 6) |
|
|
| 6 |
Adjust dimension (a) by moving upper guide rail (3) |
The dimension (a) should not be less over the entire length of the upper guide rail. |
*BE72.12-P-1001-01BA |
| 7 |
Tighten screws (5 and 6) at upper window guide rail (3) and glue textile profile |
 |
*BA72.12-P-1001-01DA |
| |
|
MB universal glue |
*BR00.45-Z-1003-02A |
| 8 |
Check window operation (1) by opening and closing |
|
|
REAR DOOR TIGHTENING TORQUE
| Number |
Designation |
Model 220 with code Z07 |
| BE72.12-P-1001-01BA |
Distance |
Dimension "a" |
mm |
698 |
| |
Fig. see |
- |
REAR DOOR TIGHTENING TORQUE
| Number |
Designation |
Model 220 with code Z07 |
| BA72.12-P-1001-01DA |
Screw for window guide rail on rear door |
Nm |
9 |
REPAIR MATERIALS
| Number |
Designation |
Order number |
| BR00.45-Z-1003-02A |
Universal adhesive |
A 000 989 82 71 |