Retrofitting TV tuner - AN82.60-P-0001C: Notes

MODEL 215 up to 31.8.02 with CODE (352a) COMAND operating and display system with CODE (862) TV preinstallation

Fig 1: Identifying TV Tuner And COMAND Operating, Display And Control Module

G04852445

	Notes on COMAND software status	Models 215, 220 with CODE (352a) COMAND operating and display system with the 3rd generation of APS.	AH82.60-P-0001-01A
	Remove
1	Connect quiescent current retention device		*WH58.30-Z-1012-09A
2	Disconnect ground cable of battery
			AR54.10-P-0003I
3	Remove coverings in trunk	Left side paneling. TV tuner should fit below side paneling, otherwise order new one.
		Model 215.3.	AR68.30-P-4600M
	Install
4	Install TV tuner (A2/42) in luggage compartment		AN82.60-P-0001-01C
5	Fit remaining parts to vehicle	Steps 3 to 1
6.1	Load software update for TV tuner (A2/42)	Only when software status must be corrected.	AN82.60-P-0001-02B
7	Change special equipment on the vehicle data card and in the vehicle data card online	Change TV preinstallation code 862 in TV tuner code 860.

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1012-09A	Quiescent current retention unit

PARTS ORDERING NOTES

Part no.	Designation	Quantity
KG82 (see EPC)	TV tuner	1
KG82 (see EPC)	Bracket	1
KG82 (see EPC)	Nut M5 (TV tuner to bracket)	1
KG82 (see EPC)	M5 x 12 screws	2
KG82 (see EPC)	Collar nut	1
KG82 (see EPC)	Clip fastener	2