Remove/install oil pump - AR18.10-P-6020L

ENGINE 137 in MODEL 215, 220

ENGINE 275 in MODEL 215, 216, 220, 221

Shown on engine 137

Fig 1: Identifying Oil Pump Remove/Install Components - Shown On Engine 137

	Remove/install
1	Remove bottom part of oil pan		AR01.45-P-7555L
2	Remove bolts for oil pump (2)	Push back chain tensioner and take off chain. Installation: Clean strainer of oil pump (1) Fill oil pump (1) with engine oil so that it pumps oil when first started.
			*BA18.10-P-1001-01B
		Screwdriver hinged bit	Figure
3	Install in the reverse order

OIL PUMP

Number	Designation			Engine 137	Engine 275
BA18.10-P-1001-01B	Bolt, oil pump to crankcase	M8 x 30	Nm	20	20
		M7 x 40	Nm	-	-
		M6 x 16	Nm	-	-

Fig 2: Identifying Screwdriver Hinged Bit (112 589 00 10 00)