Remove/install oil level sensor - AR18.40-P-5111PW
ENGINE 112 in MODEL 203.081 /084 /281 /284, 220.087 /187
ENGINE 113 in MODEL 220.083 /084 /183 /184
Shown on model 203
| Remove/Install | |||
| 1 | Remove bottom part of oil pan | Model 203 | AR01.45-P-7555PW |
| Model 220 | AR01.45-P-7555IW | ||
| 2 | Release plug (1) at connecting piece (2) and detach | ||
| 3 | Unscrew bolts (3) at connecting piece (2) | ||
| 4 | Unscrew bolts (4) at oil sensor (oil level, temperature and quality) (B40) | *BA18.40-P-1004-01B | |
| 5 | Remove connecting piece (2) and oil sensor (oil level, temperature and quality) (B40) | ||
| 6 | Install in the reverse order |
| Number | Designation | Engine 112.916/953/975, 113.948/966 | |
|---|---|---|---|
| BA18.40-P-1004-01B | Oil level sensor to top part of oil pan | NM | 8 |