Removing and installing trailer recognition control unit - AR31.19-P-1300N
MODEL 215.375 /378 1# up to 31.8.02 with CODE (550) Trailer hitch except CODE (772) AMG styling package - front spoiler, side skirts and rear apron
MODEL 215.375 /376 /378 1# as of 1.9.02 with CODE (550) Trailer hitch except CODE (772) AMG styling package - front spoiler, side skirts and rear apron except CODE (855) TELE AID
| Remove/Install | |||
| Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fire, sparks, open flames or smoking. Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte only into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| 1 | Disconnect battery ground line | AR54.10-P-0003I | |
| Notes on battery | All models | AH54.10-P-0001-01A | |
| Notes on AGM battery | Model 215 as of 1.1.01. | AH54.10-P-0002-01A | |
| 2 | Remove coverings in trunk | AR68.30-P-4600M | |
| 3 | Unscrew nut (1) and remove trailer recognition control unit (N28/1) from bracket (2) | ||
| 4 | Unlock and remove black, 20-pin coupling (3) on trailer recognition control unit (N28/1) | ||
| 5 | Unlock and remove black, 6-pin coupling (4) on trailer recognition control unit (N28/1) | ||
| 6 | Install in the reverse order | ||
| Inspect | |||
| 7 | Perform function test of light signals at the trailer hitch socket. | ||
| AN31.19-P-8100-06MN |