Locking/unlocking vehicle with interior switch, function - GF80.20-P-3009S
MODEL 215, 220
With the exception of the fuel tank flap the vehicle can be locked or unlocked centrally with the interior central locking and ATA function display switch (N72/1s6) . Theanti-theft alarm (ATA) is not activated or deactivated.
The command to unlock or lock is sent via CAN by operating the interior switch. The PSE control module (combined functions) (A37) receives this command and locks or unlocks pneumatically. The interior switch is enabled by the locking and unlocking functions of central locking via CAN.
When locking with the interior central locking switch (N72/1s6) the signals from the door contact switches are evaluated.
Possible situations are:
- Driver's door or passenger door open:
Only unlocking is permissible.
- Locking from outside with key:
Only locking is permissible.
- Unlocking from outside with key:
If none of the doors are open, full function.
| Locking/unlocking pneumatically, function | GF80.20-P-4016S | ||
| Unlocking by opening one door, function | GF80.20-P-3004S | ||
| Automatic locking, function | GF80.20-P-4009S | ||
| Locking with remote control key, function | GF80.20-P-3005S | ||
| Unlocking with remote control key, function | GF80.20-P-3006 | ||
| Relocking, function | GF80.20-P-4012S | ||
| Central locking emergency opening, function | GF80.20-P-4013S | ||
| Upper control panel control module, location/purpose/design/function | GF54.21-P-4105S |