Test values for rear axle center assembly crown wheel and pinion - BE35.31-P-1000-03B
Model 203, 209, 211
TEST VALUES FOR REAR AXLE CENTER ASSEMBLY CROWN WHEEL AND PINION
| Number | Designation | Models 203.042/043/046/081/084/242/246 281/284/740/742 203.004/061/204/261 as of 09/2002 | Model 209.342/343/361/442/461 | Model 211.042/061/242/261, Models 211.004 except code 450 | |
|---|---|---|---|---|---|
| BE35.31-P-1001-03B | Permissible deviation from the specified adjustment dimension on the end face of the drive pinion | mm | -0.02... +0.01 | -0.02... +0.01 | -0.02... +0.01 |
| BE35.31-P-1002-03B | Gear backlash between crown wheel and pinion | mm | 0.08...0.14 | 0.08...0.14 | 0.08...0.14 |
| BE35.31-P-1003-03B | Crown wheel heating temperature for installation | °C | 75...85 | 75...85 | 75...85 |