Integrated thrust washer on tapered roller bearing inner race - BT35.31-P-9402-01A
Rear axle center assembly dia. 210 in MODEL 124, 129, 140
Rear axle center assembly dia. 185 in MODEL 124, 129, 140, 201
PRODUCTION BREAKPOINT DATA/MODIFICATIONS/NEW FEATURES
| Rear axle center assembly dia. | Ratio i | Production period as of | Production period up to | Type of and reason for modification | Reference/comments |
|---|---|---|---|---|---|
| 185 | 01.03.94 | ||||
| 210 | 14.02.94 |
The thrust washer is permanently integrated on the small tapered roller bearing inner race of the drive pinion to facilitate assembly.
The thrust washer was clipped onto the tapered roller bearing inner race with 3 retaining lugs on the previous version.