Replace seat belt buckle, right rear seat - SM91.40-P-0006P

MODEL 203.7

Fig 1: Identifying Seat Belt Buckle, Cover, Right Rear Emergency Tensioning Retractor Squib

G04738340

OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES

Vehicle category	Op. no.	Operation text	Time	Acc. no.	Code
P	023498	REPLACE BUCKLE FOR SEAT BELT ON RIGHT REAR SEAT (AFTER INSPECTION)	003 WU/0.3 h	91 900 48	CL203FGURT

	Remove/install
	Risk of injury when carrying out test or repair work on airbag or emergency tensioning retractor units	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100°C. Interrupt power supply when working on such units.	AS91.00-Z-0001-01A
	Legal provisions concerning handling and storage of airbag and emergency tensioning retractor units	Models 124, 129, 140, 163, 168, 170, 202, 203, 208, 210, 215, 220, 314, 316, 318, 461, 463, 638, 901, 902, 903, 904, 950, 952, 953, 954, 970, 972, 974, 975, 976	AH91.00-P-0004-01A
1	Withdraw ignition key
2	Remove cover (2)
3	Unplug connector from right rear emergency tensioning retractor squib (R12/7).
4	Remove screw (1) on seat belt buckle	Installation: ensure that the clamping bracket is locked.
		Screw on rear belt buckle	*BA91.40-P-1007-01A
5	Remove seat belt buckle (3)	Dispose of seat belt buckle with emergency tensioning retractor squib (R12/7). Refer to:↓
	Notes on disposing of airbag and emergency tensioning retractor units		OS91.00-P-0001-01A
6	Install in the reverse order	The number stamped on the new seat belt buckle must not be 24229.
7	Reinstall removed parts.	Refer to ↓
		Check seat belt buckle, right rear seat.	SM91.40-P-0005P

TORQUE SPECIFICATION

SEATBELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 203
BA91.40-P-1007-01A	Bolt at rear seat belt buckle	Nm	30

PARTS ORDERING NOTES

Part no.	Designation	Quantity
203 860 04 69	Catch	1