Removing and installing inner paneling from rear window - AR68.30-P-1080PB

MODEL 203.7 

Fig 1: Identifying Inner Paneling From Rear Window Remove/Install Components (1 Of 2)

Fig 2: Identifying Inner Paneling From Rear Window Remove/Install Components (2 Of 2)

	Removing, installing
1	Unscrew mounts (1) for pull cables on rear shelf
2	Loosen side paneling (2) from retaining clips (3)	Left and right.
3	Remove side paneling (2)	Left and right.
4	Loosen paneling on upper window frame (4) from retaining clips at top (5)	Unclip paneling from bottom.
5	Remove paneling from upper window frame (4)	Do not break off plastic lugs on inside Remove paneling upward
6	Install in the reverse order