Retrofitting drawer below rear shelf - AZ68.30-P-0002P

MODEL 203.0 

Fig 1: Identifying Drawer Below Rear Shelf

	Removing
	For installing the drawer there are two assembly kits available. Request assembly kit by referring to chassis no.
1	Fold rear seat and rear seat backrest toward front	With folded rear seat backrest
2	Remove side upholstery from left and right rear seat backrest	With folded rear seat backrest
3	Remove rear seat and rear seat backrest	With fixed rear seat backrest
4	Remove paneling from left and right C-pillar
5	Remove cover from rear shelf
6	Remove insulating mat from rear shelf
7	Remove loudspeaker from rear shelf
	Installing
8	Check whether holes are already drilled in rear shelf for mounting drawer, if necessary drill holes in rear shelf	Up to chassis no. A054321 and F036591. For drilling cover trunk floor and remove drilling chips after drilling	AZ68.30-P-0002-01P
9	Install drawer below rear shelf	Up to chassis no. A054321 and F036591.	AZ68.30-P-0002-02P
		As of chassis no. A054322 and F036592	AZ68.30-P-0002-02Q
			*BA68.30-P-1001-01A
			*BA68.30-P-1002-01A
10	Fit remaining parts to vehicle
	Notes on using drawer	When returning the vehicle to the customer, inform the customer about the contents of this document, print out a copy of the document and give to customer.	AH68.30-P-0001-01A

PANELING, MOLDINGS

Number	Designation		Model 203
BA68.30-P-1001-01A	Screw, bracket on drawer for rear shelf	Nm	7
BA68.30-P-1002-01A	Screw for guide rail on drawer for rear shelf	Nm	7

PARTS ORDERING NOTES

Part no.	Designation	Quantity
B6 647 2101	Drawer below rear shelf	1
B6 647 2110	Assembly kit for screw below rear shelf (up to chassis no. A054321 and F036591)	1
B6 647 2111	Assembly kit for drawer below rear shelf (as of chassis no. A054322 and F036592)	1