Removing and installing lock cylinder on glove compartment lock - AR68.10-P-1250P

MODEL 203 

Fig 1: Identifying Lock Cylinder On Glove Compartment Lock Remove/Install Components

	Removing, installing
1	Open glove compartment cover
2	Press handle on left side out of catch with assembly wedge	Adjust glove compartment lock (1) to lock position
		Assembly wedge	Fig 2
3	Remove handle together with glove compartment lock	Installation:  Install spring (3) in guide (4).
4	Press lock cylinder (1) out toward front with key	Do not remove key.
5	Install in the reverse order
6	Carry out operational check

Fig 2: Identifying Assembly Wedge (110 589 03 59 00)