Removing and installing air intake at compressor - AR09.50-P-8821A

ENGINE 111.943 /944 /947 /973 /975 

Shown on model 111.975 

Fig 1: Identifying Air Intake Bolts - Shown On Model 111.975

Fig 2: Side View Of Air Intake At Compressor

	Removal, installation
1	Remove air cleaner	Disconnect suction and pressure pipes at compressor and seal openings at compressor	AR09.10-P-1050GA
2.1	Remove engine mount and engine support	Engine 111.944/975 only model 202 Engine 111.947 only model 210	AR22.10-P-1260HA
3	Remove air intake	Replace rubber seal
			*BA09.50-P-1004-01A
			*BA09.50-P-1006-01A
4	Install in the reverse order

Compressor

Number	Designation		Engine 111.943/944/947/973/975
BA09.50-P-1004-01A	Air intake at compressor	Nm	25
BA09.50-P-1006-01A	Connecting bolt of air intake/pressure connection	Nm	15