Removing and installing hand brake lever - AR42.20-P-0500A

MODEL 170 

Fig 1: Identifying Hand Brake Lever Remove/Install Components

	Removing, installing
1	Detach return spring (94)
2	Slacken adjusting screw (89)
3	Unscrew self-locking stud bolt (93) at intermediate lever and front hand brake cable.	Installation  : Replace self-locking bolt (93).
4	Pull rubber handle (75a) off hand brake lever (75)	Rubber handle can only be removed from hand brake lever with great force (suction). If necessary cut open with a suitable tool.
5	Remove cover on shift lever (111)		AR68.20-P-2310G
6	Remove rear center console (115)		AR68.20-P-2020G
7	Remove contact switch for hand brake indicator lamp.
8	Unscrew bolts (72) and pull out hand brake lever (75) forwards.		*BA42.20-P-1003-01A
9	Install in the reverse order
10	Adjusting parking brake		AR42.20-P-0540A

Parking brake

Number	Designation		Model 170
BA42.20-P-1003-01A	Bolt, hand brake lever to center tunnel	Nm	20