Removing and installing recirculated air flap actuator with resonance body - AR09.50-P-8842GS
ENGINE 111.958 /983
| Removing, installing | |||
| 1 | Remove air cleaner together with air intake pipe | AR09.10-P-1050GS | |
| 2 | Unscrew nuts (2) | ||
| 3 | Separate plug connection of recirculated air flap actuator (M16/1x1) from recirculated air flap actuator (M16/1) | ||
| 4 | Detach hose strap (3) | ||
| 5 | Detach vent hose (5) from intake damper (1) | ||
| 6 | Lift recirculated air flap actuator (M16/1) together with intake damper (1) up and off the inlet and pressure connections (4) | ||
| 7 | Install in the reverse order |