Removing and installing side air nozzle - AR68.10-P-1100G

MODEL 170 

Fig 1: Identifying Side Air Nozzle Remove/Install Components

	Removal, installation
1	Turn plugs (2) 90° to left and remove cover (1)	Open and close catches with suitable coin
2	Unscrew screw (arrow)
3	Pull air nozzle (3) out toward rear	When installing connect air nozzle (3) to air duct (4)
4	Unclip switch (headlamp range control, arrows)
5	Lay down air nozzle (3)
6	Reinstall in opposite order