LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2004 >> SLK230 Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- Testing & Repair -- 170 Chassis - 2 Of 2 >> Testing & Repair >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550C >> Pulling tapered roller bearing outer races into rear axle housing - AR35.31-P-0550-14C

Pulling tapered roller bearing outer races into rear axle housing - AR35.31-P-0550-14C

Fig 1: Identifying Installer (116 589 11 61 00)
G04636490
  1. Pull front tapered roller bearing outer race (43e) and rear tapered roller bearing outer race (46b) all the way into rear axle housing using SPECIAL TOOL installer (060a, 060c, 060d).

    IMPORTANT Ensure that the shim (45) is inserted. Do not tilt tapered roller bearing outer races (43e), (46b) when pulling in.

    Fig 2: Identifying Shim, Threaded Spindle And Rear Tapered Roller Bearing Outer Race
    G04636491
scientia non olet · About LEMON Manuals