LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2004 >> SLK230 Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- Testing & Repair -- 170 Chassis - 2 Of 2 >> Testing & Repair >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550C >> Loosening and unscrewing twelve-point collar nut on joint flange - AR35.31-P-0550-35C

Loosening and unscrewing twelve-point collar nut on joint flange - AR35.31-P-0550-35C

Fig 1: Identifying Pin Wrench (129 589 01 07 00)
G04635086
Fig 2: Identifying Socket Wrench Bit (126 589 02 09 00)
G04635087
  1. SPECIAL TOOL Mount pin wrench (040) on joint flange (41). Slacken twelve-point collar nut using SPECIAL TOOL Socket wrench bit (040a) and remove.

    IMPORTANT Do no remove collar protection when slackening twelve-point collar nut.

    Shown: 185 mm dia. rear axle center assembly 

    Fig 3: Loosening Twelve-Point Collar Nut On Joint Flange
    G04635088
scientia non olet · About LEMON Manuals