LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2004 >> SLK230 Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft -- 170 Chassis >> Testing & Repair >> Removing and installing propeller shaft - AR41.10-P-0050EA >> Connect sections of propeller shaft - AR41.10-P-0050-05DA

Connect sections of propeller shaft - AR41.10-P-0050-05DA

Long-life grease (NLGI grade 2) BB00.40-P-0266-02A
  1. Coat the splined profile with Molykote grease before assembly.
  2. Reconnect front and rear sections of propeller shaft. The humps on the front propeller shaft must be between the two humps on the linkage arm (arrows).

IMPORTANT Ensure correct seat of rubber sleeve at large diameter.

Position of propeller shaft without clamp connection 

Fig 1: Position Of Propeller Shaft Without Clamp Connection
G04624926

Position of propeller shaft with clamp connection 

Fig 2: Position Of Propeller Shaft With Clamp Connection
G04624927
scientia non olet · About LEMON Manuals