Secure Vario roof load assist position - AR77.50-P-3000-02R

Fig 1: Identifying Support (230 589 06 63 00)

Courtesy of MERCEDES-BENZ USA

The Vario roof is in the load assist position.

1. Install supports (1) on both hinges (2) and on left and right Y-fastener (3).

   Always install both supports (1) on Y-fasteners (3) to prevent damaging Vario roof.

2. Secure both supports (1) against slipping off with cable strap (4).
   Fig 2: Identifying Supports On Both Hinges

   Courtesy of MERCEDES-BENZ USA