LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2004 >> SL500 >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Fuel & Ignition -- Self-Diagnostic System -- 230 Chassis >> Self-Diagnostic System >> Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000 >> ME-SFI fuel injection and ignition system (ME), DTC memory - AD07.61-P-4000M >> CAN fault detection ME-SFI - fault code description - AD07.61-P-4000-32MI

CAN fault detection ME-SFI - fault code description - AD07.61-P-4000-32MI

1 Fault code
(Fault code according to OBD)		 P207B No CAN message selector lever position from ETC control unit (N15/3) or message incorrect (-)
2 Fault storage After expiry of test duration and fault
  Actuation of engine diagnosis indicator lamp (EURO4) or CHECK ENGINE (MIL) USA ONLY No actuation
3 Checking frequency Continuous
4 Checked signal or status The selector lever position is sent from the ETC control unit (N15/3) via the CAN to the engine control unit.
This communication is monitored.
5 IMPORTANT Also read out the ETC [EGS] control unit fault memory.
scientia non olet · About LEMON Manuals