ME-SFI [ME] vehicle features - AH07.61-P-0002-02E

Functions/components for national version :

• Secondary air injection
• Exhaust gas recirculation (except engine 137)
• O₂ -Sensors downstream of the three way catalytic converter
• Two-sensor control
• Monitoring catalytic converter efficiency
• On-board Diagnosis (OBD II)
• "CHECK ENGINE" MIL
• Data link connector (scan tool)
• Drive authorization system with infrared system. Exterior receivers on front doors and at rear.
• All types from model year 1998 inclusive:

  Warning for the fuel system "Open" (fuel tank cap cover indicator)

• Model 129/202 up to model year 97: purge system monitoring pressure sensor
• Intake manifold pressure sensor
• All types from model year 1998 inclusive: System regeneration with leak test. Additional components:
  • Sensor for the tank pressure
  • Activated charcoal canister shut-off valve
• All types from model year 1998 inclusive (except for type 163): The fuel vapors are caught in the filling neck when filling up the fuel tank and sent are sent to the activated charcoal canister (ORVR = Onboard Refueling Vapor Recovery). The activated charcoal canister is enlarged.
• Flexible Fuel Vehicle (FFV) 

  Engine 112.946 as of 15.7.02/7/02 with code 929 

  FFV vehicles can be filled with premium fuel or with ethanol (ethanol content 85 %). In this way mixtures arise in the fuel tank with an ethanol content of between 0 and 85 %. The ethanol content is taught in after each filling of the fuel tank and mixture creation is adjusted accordingly.