Fuse assignment of fuse and relay box in right engine compartment - GF54.15-P-1256-02IR
Assignment in the fuse and relay box in the right engine compartment
| Fuse | circuit | Color of fused wire | Fused function | Rating in amperes (A) |
|---|---|---|---|---|
| 28 | 30 | - | Fanfare horns relay (K40/7kP) | 15 |
| 29 | 87 | - | Motor electronics/chassis relay (K40/7kK) | 20 |
| 30 | 87 | - | Motor electronics/chassis relay (K40/7kK) | 20 |
| 31 | 87 | - | Air pump relay (K40/7kN) | 40 |
| 32 | 87 | - | Air compressor relay (K40/7kO) | 40 |
| 33 | 30 | rd/ye 4.0 mm2 | Heating systems recirculation unit (A32) | 40 |
| 34 | 87 | rd/ye 0.5mm2 | Traction systems control module (N47) | 5 |
| 35 | 30 | - | - | - |
| 36 | 87 | rd 0.5 mm2 | with Distronic (code 219a): DTR control module (N63/1) |
7,5 |
| 37 | 87 | rd/ye 1.5mm2 rd/ye 0.75mm2 |
Connector sleeve circuit 87 (Z7/5):
|
15 |
| 38 |
30 | rd/bk 0.5mm2 | Luggage compartment interior button (KIT) | 5 |
| 39 | 30 | rd/bk 4.0mm2 | Right front door control module (N69/2) | 40 |
| 40 | 15 | rd 0.75mm2 | With Xenon headlamps (code 612b): Headlamp range adjustment control module (N71) |
10 |
| 41 | 30 | rd 2.5 mm2 | With stationary heater (code 228): via circuit 30 connector sleeve (solder connector in harness) (Z7/26):
|
20 |
| rd 0.75mm2 |
|
|||
| 42 | 30 | bk/bl 1.5mm2 |
|
20 |
| 43 | 87 | rd/bl 4.0mm2 | Diesel engine only
|
25 |
| rd/bl 2.5 mm2 rd/bl 0.5mm2 |
|
|||
| 44 | OM613 | 87 rd/gn 1.5mm2 | Diesel engine only
|
7.5 |
| rd/gn 1.0mm2 |
|
|||
| 44 | OM628 87 | rd/gn 2.5 mm2 rd/gn 1.5mm2 rd/gn 0.5mm2 |
via connector sleeve, circuit 87D2 (Z7/48)
|
10 |
| rd/gn 0.75mm2 |
|
|||
| 45 | - | - | - | - |
| 46 | 87 | ws/ge 0.5 mm2 | with Active-Body-Control (ABC):
with air suspension:
|
5 |
| 47 | 15 | bk/bl 0.75mm2 | AAC multifunction sensor (B31/1) | 10 |
| bk/bl 0.5mm2 | Control module box blower motor (M2/2) | |||
| bk/bl 0.75mm2 | AAC multifunction sensor (B31/1) Actuation of auxiliary air unit relay (K25) via coolant or transmission oil cooling connector (X22/3) via blower/fan connector sleeve (Z5/1)
|
|||
| bk/bl 0.5mm2 | ||||
| 48 M112/113 | 15 | bk/vi 0.5mm2 | Suction-type fan control module (N65/2) | 7,5 |
| 48 M137 | 15 | bk/vi 0.5mm2 | Engine and AC electric suction fan with integrated control (M4/7) | 7,5 |
| 49 | 15 | bk/ye 1.5mm2 | Fused via circuit 15 connector sleeve (Z3/29) | 15 |
| bk/gn 1.5mm2 |
|
|||
| bk 1.0mm2 |
|
15 |