Remove, install door foil on front door - AR72.10-P-1010MC

MODELS 220.175 /178 with CODE (Z04) Light armoring 

Fig 1: Identifying Door Foil On Front Door Remove/Install Components

	Remove
1	Remove door liner from front door		AR72.10-P-1000MC
2	Drill off rivets (3) from door lining bracket (2)
3	Detach door lining bracket (2)
4	Detach door foil (1)	Door foil is damaged when removed.
5	Remove residual sealing strip from inner door panel
	Install
6	Attach sealing strip (A and B) to inner door panel	Sealing strip Ø 5 mm	*BR00.45-Z-1036-01A
		Sealing strip Ø 10 mm	*BR00.45-Z-1060-02A
7	Adhere door foil (1) to inner door panel	Ensure correct routing of loudspeaker cable and Bowden cable (arrows). Press on door foil securely using roller to ensure optimum sealing.
		Roller	Fig 2
8	Insert door lining bracket (2) and rivet on
9	Install door liner in front door		AR72.10-P-1000MC

Fig 2: Identifying Roller (168 589 05 63 00)

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1036-01A	Sealing strip	A 140 989 00 98
BR00.45-Z-1060-02A	Window installation repair kit	126 670 01 93