Remove, install rear door triangular window - AR72.12-P-1940MC

MODELS 220.175 /178 with CODE (Z04) Light armoring

Fig 1: Identifying Rear Door Triangular Window Remove/Install Components

G04850084

	Remove
	Operations involving work on glass panes and windows are potentially dangerous; use caution to avoid allowing hands or feet to become caught.	Secure windshield and windows from dropping down; use only the lifting tools specified for such operations. Wear safety shoes.	AS67.00-Z-0003-01A
	Instructions for avoiding damage to windows installed in special high-security vehicles	MODEL 210 with Code Z04, Code Z06 MODEL 220 with Code Z04, Code Z07	AH67.00-P-0003-01FB
1	Remove window in rear door		AR72.12-P-1920MC
2	Pull out triangular window (1)	Tensioning clamp	Figure
	Install
3.1	Fit new gasket (2) on triangular window (1)	If necessary
4	Seal door frame assembly in installation area of triangular window using sealant	see Fig 1	*BR00.45-Z-1014-01A
5	Insert triangular window (1) with gasket (2)	Press triangular window into the door frame assembly as far as possible.
6	Install window in rear door		AR72.12-P-1920MC
7	Seal gasket (2) all around with respect to the triangular window (1)	see Fig 1	*BR00.45-Z-1005-02A

Fig 2: Identifying Clamping Pliers (170 220 589 04 31 00)

G04850085

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1014-01A	Adhesive tape	A 000 989 98 85
BR00.45-Z-1005-02A	Sealing adhesive	A 004 989 53 71