Remove/install seat adjuster at front seat - AR91.10-P-1450N

MODEL 215 

Fig 1: Identifying Seat Adjuster At Front Seat Remove/Install Components - Model 215 (1 Of 2)

Fig 2: Identifying Seat Adjuster At Front Seat Remove/Install Components - Model 215 (2 Of 2)

	Remove/Install
1	Remove front seat	Place front seat on a suitable, clean base.	AR91.10-P-1000N
2	Remove seat cushion		AR91.10-P-1070N
3	Disconnect threaded connections (2, 3, 4, 5)		Figure
			*BA91.10-P-1007-01C
4	Detach wiring harness (6)	Remove tie straps
5	Install in the reverse order

FRONT SEATS

Number	Designation		Model 215
BA91.10-P-1007-01C	Bolt of seat adjusting device to seat backrest	Nm	21

Fig 3: Identifying Torx Bit Set (000 589 01 10 00)