Measure valve setback to cylinder head - AR05.30-P-4100-01AV
MODIFICATION NOTES
| 25.3.04 | Value changed from 8.50...8.90 mm to 8.05...8.45 mm | Value in series 1001, exhaust valve, for engine 113.962/982/987/990/991/993 changed | |
| 25.3.04 | Value changed from 7.90...8.30 mm to 7.20...7.60 mm | Value in series 1001, intake valve, for engine 113.962/982/987/990/991/993 changed |
TEST AND ADJUSTMENT VALUES OF CYLINDER HEAD
| Number | Designation | Engines 112, 113.940/941/ 942/943/944/ 945/946/948 except 112.976 |
Engine 112.976 | ||
|---|---|---|---|---|---|
| BE01.30-P-1001-02D | Valve setback of new valves and new valve seat rings | Exhaust valve | mm | 8.05...8.45 | 8.50...8.90 |
| Intake valve | mm | 7.60...8.00 | 7.90...8.30 | ||
TEST AND ADJUSTMENT VALUES OF CYLINDER HEAD
| Number | Designation | Engine 113.960/961/ 963/965/966/ 967/968/980/ 981/984/986/ 992/995 |
Engine 113.987/ 988/989/ 990/991/ 993 |
||
|---|---|---|---|---|---|
| BE01.30-P-1001-02D | Valve setback of new valves and new valve seat rings | Exhaust valve | mm | 8.5...8.9 | 8.05...8.45 |
| Intake valve | mm | 7.90...8.30 | 7.20...7.60 | ||
WORKSHOP EQUIPMENT
| WE58.40-Z-1002-19A | Depth gage |
Shown on engine 606
- Measure valve setback (a) with depth caliper gage.