Inside rearview mirror, function - GF68.49-P-2100-03S

Model 215, model 220 

Function 

The inside rearview mirror (A67) can be adjusted automatically with the memory function (depending on equipment), i.e. stored mirror position can be called up For this purpose, two DC motors, a vertical adjustment motor (A67m1) and a horizontal adjustment motor (A67m2) are present in the housing actuated by the overhead control panel control module (N70)The vertical position potentiometer (A67r1) and horizontal position potentiometer (A67r2) are located next to the motors for position recognition.

The mirror lens of the inside rearview mirror (A67) can be electrochromatically dimmed. Dimming is accomplished according to the variables measured by the mirror dimming forward sensor (A67h1) and mirror dimming backward sensor (A67h2).

The left reading lamp (A67e1) and right reading lamp (A67e2) as well as the ambient light (A67e3) are also integrated in the mirror housing.

Additional functions on vehicles as of 1.9.03 with telephone or with telephone and voice control system (VCS): 

A hands-free system microphone group (A67b1) is integrated in the inside rearview mirror (A67).

The following functions can be performed via the hands-free system microphone group (A67b1):

• Voice input for making telephone calls using the hands-free system
• Voice input for voice control system (VCS) (interactive dialog with VCS)

The signals are transmitted to the hands-free system control module (A35/1) or the voice control module (A35/11) via the hands-free system microphone group (A67b1).