Storing parking position for exterior rearview mirror, function - GF88.79-P-3004S

MODEL 215, 220 (except, 220.063) 

MODEL 220.063 with CODE (275a) Memory package (driver's seat, steering column, mirrors) 

Function prerequisites 

• 15R or c.15 ON
• Vehicle speed v=0 km/h

Function 

The parking position for the exterior mirror on the passenger side can be stored in relation to the key with the left front door control module (N69/1)  (vehicles with right-hand steering: right front door control module (N69/2)). For this purpose it is first necessary to adjust the rearview mirror to the desired parking position manually with the mirror adjustment switches in the exterior mirror adjustment switch group with mirror fold-in/out feature (S50/1)  . Then press the memory switch (N69/1s9)  (vehicles with right-hand steering: (N69/2s9)), and within 3 seconds the bottom  half of the rocker switch of the exterior mirror adjustment up/down switch (S50/1s1). 

When this combination of buttons is pressed the left front door control module (N69/1)  transmits the CAN message "Store parking position" to the right front door control module (N69/2)  (vehicles with right-hand steering: vice versa. The momentary exterior rearview mirror position is then stored as the parking position.