Storing exterior rearview mirror position, function - GF88.79-P-2004S

MODEL 220 (except 220.063) with CODE (275a) Memory package (driver's seat, steering column, rearview mirrors) 

MODEL 215, 220.063 

Function prerequisites 

• Voltage not too low or too high
• 15R or c.15 ON

Function 

Two positions for the left electrically adjustable and heated exterior rearview mirror (M21/1)  and right electrically adjustable and heated rearview mirror (M21/2)  can be stored per ignition/starter key.

The interior rearview mirror position, steering column position and driver's seat position are stored simultaneously with the exterior rearview mirror position.

The positions for the left/right exterior rearview mirrors are stored in the left front door control module (N69/1)/right front door control module (N69/2). 

To store the momentary exterior rearview mirror positions press the memory switch (N69/1s9)  in the left front door control module (N69/1)  and then the memory position 1 switch (N69/1s6)  or memory position 2 switch (N69/1s7)  within 3 s. The door control module (N69/1, N69/2) checks whether the values from the position measurement  for the left/right exterior rearview mirror are valid. If so the values are stored in the door control module in relation to the key.

If no positions are stored for the ignition/starter key used, the current rearview mirror positions are stored under the key number when the key is removed.