Remove/install rubber mount on track rod - AR35.20-P-0112-01I

Fig 1: Identifying Extraction And Insertion Tool (220 589 00 43 00)

Remove rubber mounts 

1. Press rubber mount (4b) out of the tie rod (4) using tool for pressing in and out. To do this, use sleeve (04g) and thrust piece (04h).
   Fig 2: Identifying Rubber Mount And Tie Rod

   

   Install rubber mount 

2. Press rubber mount (4b) into the tie rod (4) using sleeve (04g) and thrust piece (04h) until the thrust piece (04h) abuts the eye of the tie rod (arrow).
   Fig 3: Pressing Rubber Mount Into Tie Rod