Removing and installing transmitter/receiver unit - AR82.70-P-8911M
MODEL 215, 220 as of 1.7.00 with CODE (853) MB standard cellular telephone
Shown on model 220
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead acid batteries. | No fire, sparks, naked flames or smoking. Wear acid-protective gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| 2 | Disconnect ground cable of battery | AR54.10-P-0003I | |
| Notes on battery | All models. | AH54.10-P-0001-01A | |
| 3.1 | Remove rear seat cushion | Model 215. | AR91.12-P-1020N |
| Model 220. | AR91.12-P-1020MA | ||
| 3.2 | Remove bucket seats | Model 220 with code 401, right side only. | AR91.12-P-1020M |
| 4 | Remove seat adjustment mechanism on rear seat | Model 220 with code 401, right side only. | AR91.12-P-1520M |
| 5 | Unscrew screws (1) and nuts (2) and remove mounting plate (3) from vehicle floor | ||
| 6 | Release connectors on D2B telephone transmitter/receiver (A35/13) and disconnect | ||
| 7 | Unscrew sheet metal screws (4) | ||
| 8 | Install in the reverse order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |