Convenience opening, power windows, function - GF72.29-P-3004S

MODEL 215, 220 

Function prerequisites 

• Voltage not too low or too high and
• All doors closed (status: unlocked) and
• Ignition starter key in position "0" or removed and
• "Unlock" button on remote control key (A8/1) pressed for longer than 1 s ( , : key in "unlock" position)

Function 

The affected control modules (model 220: N69/1, N69/2, N69/3, N69/4; model 215: N69/1, N69/2 and N22/6) receive the signal/CAN message for convenience opening  and then actuate the corresponding power window motors (M10/3, M10/4, M10/5, M10/6)  . The motors are actuated as long as the button on the remote control key is pressed, however, max. 25 s.

The power window convenience opening feature functions even when the windows are not synchronized  .

The convenience opening feature is interrupted when

• the request via CAN bus is no longer received or
• the function prerequisites specified above are no longer fulfilled.

Moreover, when the convenience opening feature is actuated the sliding roof  is opened and the seat ventilation  (special equipment) is switched on.