Removing and installing cover below instrument panel (right) - AR68.10-P-1520N
MODEL 215
| Removal, installation | |||
| 1 | Remove cover (1) with insert lugs (2) toward front out of knee guard (3) and toward rear out of both retainers (arrows) on heater housing (6) | ||
| 2 | Unclip footwell lamp from knee guard (3) and disconnect connector | ||
| 3 | Unscrew screws (4) | ||
| 4 | Push knee guard (3) with hooks (5), (4 each) toward bottom out of instrument panel (7) | ||
| 5 | Install in opposite order |